
Mixed E-Waste Pickup and Recycling in Des Moines, IA
Facilities and sustainability teams can sort retired office electronics into named streams, hold data-bearing devices apart, and learn where each stream goes next. Pickup is free for qualifying business volumes, with processing in Lincoln, Nebraska.
Which office electronics count as e-waste in Des Moines, and where do they go?
Precision E-Cycle provides e-waste recycling in Des Moines for mixed business electronics such as monitors, printers, copiers, VoIP phones, networking gear, and cables. Mixed electronics are picked up and processed at Precision's only facility, in Lincoln, Nebraska. Recyclable material then goes to R2-certified downstream processors, and data-bearing devices travel as their own stream.
Facilities managers in Des Moines often gather e-waste from many rooms, not one. According to the Greater Des Moines Partnership's 2025 major employer list, MercyOne has 5,641 employees across metro hospitals and home care, and downtown also holds city, Polk County, state, and federal offices. When several departments release equipment on different schedules, one mixed pile hides what it contains.
What does stream sorting give an operations team?
Fewer surprises on collection day
When each stream is named in advance, unlisted or questionable items surface during planning instead of at the loading dock. The collection plan then reflects what departments actually released.
Data-bearing devices stay visible
Phones, loose drives, and devices with unknown storage are held apart from general electronics recycling. The data decision then rests with the policy owner, not with whoever loaded the cart.
A route the sustainability lead can explain
Knowing which streams go to R2-certified downstream processors gives the sustainability team a factual statement for internal reporting. It avoids claiming outcomes the project cannot document.
Request Service
Ready to Recycle?
Pickup is free for qualifying business volumes. Schedule yours or contact us with questions.
Related Services
How does a Des Moines e-waste project move from sorting to closeout?
Gather department lists
Ask every department or floor releasing electronics for a short list. Each line gives the category, a rough quantity, and whether anyone knows the device held data. Items missing from the accepted list go on a hold line.
Sort into named streams
Group equipment into displays, office imaging, phones and mobile, networking and power, and cables and peripherals. Move every device with storage, or with unknown storage, into a separate data-bearing stream.
Confirm scope and pickup
Compare the streams with the accepted list and request a quote for the combined volume, with free pickup. Staging areas, building access, and any held items are settled in the project review.
Match records to streams
At closeout, compare received categories and quantities with the department lists you released. Data-bearing items carry their own certificate, with fields agreed in the project review before collection.
Which electronics go in each stream of a Des Moines e-waste project?
An electronic waste project differs from a computer refresh because the material is mixed. One storeroom can hold monitors, a retired copier, a box of VoIP phones, spare switches, and a tangle of power cords. Sorting that material into named streams is the core of the work, because the stream decides each item's route and record.
What if an item is not on the accepted list?
Mixed e-waste and legacy hardware appear on the accepted list, which helps with odd leftovers from a closet cleanout. Items outside the list, such as appliances or loose batteries, are not assumed to be accepted. Put them on a hold line and raise them in the project review before collection is planned.
Older displays
CRT monitors, CRT televisions, and large plasma screens are listed with separate handling conditions. Give them their own line on the department list so the project review can confirm how they are handled.
See the full accepted equipment list
Does working equipment belong in a recycling stream?
Some equipment in a mixed release may still work, and a department may ask whether it has value. That is an IT asset disposition question, and resale or buyback terms are never assumed on an e-waste project. Flag those items separately so the recycling streams are not held up while someone decides.
Reuse review through IT asset disposition
Which office devices can hide storage?
NIST SP 800-88 Rev. 2, section 2.2, lists storage media as including phones, mobile computing devices, "networking devices, and office equipment". That puts copiers, multifunction printers, VoIP phones, and switches in the data conversation, not only computers. Treat any device with unknown storage as data-bearing until its owner confirms otherwise.
Which records follow the material?
Two kinds of record usually matter on an e-waste project. The first is a receipt of what left the building, by stream, category, and quantity. The second applies only to data-bearing items and describes how their data was handled.
- A received record by stream and quantity that lines up with the department lists you released.
- A separate certificate for data-bearing devices, with its fields agreed before collection.
- A written note of each stream's route, including which streams go to R2-certified downstream processors.
- An exceptions list for held, unlisted, or reclassified items, so nothing disappears between two lists.
Agree the format of both records before staging begins, while department contacts still remember what they sent. IT asset managers typically expect device detail for the data-bearing group, while sustainability leads usually want totals by stream. Settling that early avoids a closeout record that answers the wrong question.
Key takeaway
Name each stream, keep unlisted items on hold, and agree both kinds of record before a single pallet is staged.
Which standards apply to e-waste, and which credentials does Precision hold?
Much of a Des Moines e-waste release, such as monitors, cables, and power supplies, carries no data, so routing and handling are the main questions for those streams. Precision E-Cycle applies data destruction methods informed by NIST SP 800-88 Rev. 2 to the storage-bearing stream. Keeping those two questions apart stops a cable bin from being treated like a drive.
NIST SP 800-88 for the data-bearing stream
NIST SP 800-88, Guidelines for Media Sanitization, is the reference most buyers use for storage media. It shapes a sanitization program rather than certifying any provider, and the method it points to depends on the media type and the data's sensitivity.
Data destruction methods by media type
Shredding is not one size
Per NIST SP 800-88 Rev. 2, section 3.1, pulverize and shred techniques for information storage media should be avoided for anything but the lowest security categories of data. That is why the method for each data-bearing group is chosen in the project review, not assumed from the device type.
The same revision, in section 4.6 and its Appendix C sample, describes a certificate of sanitization completed for each item of media. Use it as a yardstick when your policy owner lists the fields the organization expects. Precision confirms which of those fields its certificate carries during the project review, rather than promising every one in advance.
How is each stream routed after sorting?
- Which streams go to R2-certified downstream processors once they are sorted and counted.
- Whether any stream is considered for reuse, and that any terms are confirmed for the specific project.
- How the route for each stream will be described in the closeout record.
- What happens to an item that turns out not to be accepted after it is staged.
A route statement is only as useful as its specifics, and one line saying everything was recycled does not show which stream went where. Ask for the route in writing, stream by stream, and file it with the closeout record.
What do Precision's ISO certifications cover?
Precision E-Cycle holds ISO/IEC 27001:2022, ISO 14001, ISO 9001, and ISO 45001. These describe how Precision runs its own management systems. They do not certify a customer's program or stand in for the customer's own obligations.
- Which streams carry no data and can go straight into recycling once they are counted?
- Which data-bearing items need a method decision, and who in the organization owns that decision?
- Does an internal policy, lease, or contract require a specific record for any of this equipment?
- Has legal or compliance identified a state or sector requirement that the project review should address?
Bring the answers to those four questions to the project review, even where the answer is unknown. An open question recorded early is easier to resolve than one found on collection day. Buyers who need destruction at their own site can compare that option on a separate page.
Compare on-site data destruction
Key takeaway
Use NIST SP 800-88 for the storage stream, read each ISO credential in its own scope, and treat R2 as the downstream processors' credential.
How should Des Moines departments prepare for collection day?
Principal Financial Group, with 5,575 employees on the 2025 regional employer list, is one of several large financial employers sharing Greater Des Moines with hospitals, Drake University, and public offices. A tower or campus in that mix may release equipment from dozens of rooms on different schedules. One coordinator should gather every department list and own the combined stream count.
- Equipment category and rough quantity for each room, floor, or department.
- A named contact who can approve release of that department's equipment.
- Any device with storage, or unknown storage, flagged for the data-bearing stream.
- Building access details, such as a loading dock, freight elevator, or parking constraint.
Stage by stream, not by department
Department lists are how the equipment is found, but streams are how it should be staged. Set up one labeled area per stream rather than one shared pile per floor. Keep the data-bearing stream secured and counted apart from the general electronics streams until it is released.
Pickup scope
Precision E-Cycle picks up e-waste in Des Moines and West Des Moines, processes them at its Lincoln, Nebraska facility, and sends recyclable material to R2-certified downstream processors. The project review confirms eligibility, staging, and building access before a date is set.
How does a Des Moines business get e-waste picked up?
Schedule a pickup. Des Moines businesses request a project review and a free quote, equipment is picked up at their site, and the equipment is processed at Precision E-Cycle's secure Lincoln, Nebraska facility, which also takes business drop-off. Large releases often span the city line: the 2025 regional employer list shows Wells Fargo with 11,000 employees across main locations in Des Moines and West Des Moines.
A release that spans several addresses should keep each site's streams on separate lines so one plan can cover them all. If a site changes its count during staging, note the change against that site's list rather than adjusting the total quietly. The closeout record is then reconciled site by site as well as stream by stream.
Store-by-store planning for multi-location retailers
Who brings what to the project review
Public offices downtown, such as Polk County and state agencies, may also need an internal surplus or records approval before equipment leaves. Ask that approver early and record the answer on the department list. A release that waits on one signature is easier to plan around when everyone knows it is pending.
What happens on collection day?
- Keep the coordinator on site to walk each staged stream against the combined list.
- Leave held and unlisted items in place, marked as held, so they are not loaded by mistake.
- Count the data-bearing stream on its own and note that count separately from the other streams.
- Record any change to a site's count before the equipment leaves the building.
Once collected, the equipment travels to Lincoln, Nebraska, where accepted items are logged by available make, model, and serial information before processing begins. Recyclable material then goes to R2-certified downstream processors. Keep the coordinator's marked-up list until the closeout record arrives and has been compared line by line.
When the release is mostly computers
Some releases turn out to be mostly desktops and laptops with a few monitors attached. In that case the work leans toward an asset inventory rather than stream sorting. The computer recycling page covers that approach in more depth.
Inventory-led computer recycling
Key takeaway
One coordinator, one list per department, one labeled area per stream, and a project review before any date is set.
Des Moines E-Waste Recycling Questions
Request Service
Ready to Get Started in Des Moines?
Get a free quote or send us a message about your project, and we scope pickup and documentation around your site.