Manufacturing ITAD and Data Destruction in Overland Park, KS
Kansas-Side Manufacturing ITAD

Manufacturing ITAD and Data Destruction in Overland Park, KS

Retire engineering workstations, plant servers, network gear, and data-bearing printers from manufacturers in Olathe, De Soto, Lenexa, and Kansas City, Kansas, with each device classified by the data it held. Schedule free pickup for qualifying business volumes anywhere on the Kansas side of the metro, and we process the equipment at our secure Lincoln, Nebraska facility.

Engineering workstations, office desktops, laptops, and thin clients
Plant servers, storage arrays, switches, routers, and firewalls
Printers, multifunction copiers, scanners, and label printers that store job data
Sanitization matched to media type and data sensitivity, informed by NIST SP 800-88
Chain of custody from pickup at your plant to intake in Lincoln
Recycling through downstream processors when no reuse path exists

What Does Manufacturing ITAD Cover Around Overland Park?

Precision E-Cycle provides manufacturing electronics recycling and ITAD for Overland Park and nearby Kansas-side plants, from front-office laptops to engineering workstations, plant servers, network closets, and data-bearing printers. Each device is classified by the data it held and sanitized by methods informed by NIST SP 800-88 Rev. 2, with scheduled pickup and processing at our secure Lincoln, Nebraska facility.

For a Kansas-side plant IT manager, the hard part is proving which devices held payroll or design data. Overland Park is mostly an office market, and the Overland Park Chamber's 2025 major private employer list names no manufacturer. The plants sit in Olathe, Lenexa, De Soto, and Kansas City, Kansas, where K.S.A. 50-6,139b covers employee records on every retired computer.

What Plant IT, Engineering, and EHS Teams Gain

Engineering data handled above the lowest tier

Per NIST's July 2026 FAQ for SP 800-88 Rev. 2, shredding is ineffective for medium and high security categories because of data density. Drives holding CAD models, process parameters, or contract data are matched to purge or another suitable method rather than sent to a shredder by default.

One list for office and production equipment

Front-office PCs, engineering workstations, server rooms, and floor printers from a Kansas-side plant go on a single serialized inventory. IT closes the assets, security files the sanitization records, and procurement reconciles fixed asset write-offs from the same list.

Hazardous parts identified before pickup day

Batteries, fluorescent lamps, and mercury switches or relays are flagged during the inventory, so your EHS team can route them under Kansas universal waste rules where they apply before any electronics move. The electronics load and the universal waste stream stay apart from the start.

Request Service

Ready to Recycle?

Pickup is free for qualifying business volumes. Schedule yours or contact us with questions.

Prefer to call?

Monday through Friday, 8:00 AM to 5:00 PM, Central time.

402-540-6965
How It Works

How a Kansas-Side Plant Retirement Runs, Step by Step

01

A plant inventory on separate tabs

List office IT, engineering workstations, servers, network gear, and data-bearing printers with serial numbers and asset tags. Put shop-floor control hardware, batteries, lamps, and mercury-containing parts on their own tabs, so we can scope a route for each of those items.

02

Data classification and a method for each device

Each device is tagged by the most sensitive data it held: employee records, proprietary engineering files, or information your contracts mark as controlled. The method follows that tag and the media type, and working equipment is weighed for reuse first, the order KDHE Policy 05-02 sets.

03

Pickup matched to the serial list

Pickup is free, and equipment is collected from your Olathe, Lenexa, De Soto, or Kansas City, Kansas site and checked against the inventory before the truck leaves. Your contact signs the chain of custody record at the moment control of the equipment passes to Precision.

04

Processing in Lincoln and a closed file

At our Lincoln facility, each serial is logged at intake against your plant list and its data tag, media are sanitized or destroyed by the assigned method, and hardware with no reuse path goes to downstream processors. A certificate of destruction and an asset report come back for your audit file.

What Equipment and Data Does a Kansas-Side Manufacturer Retire?

A Kansas-side plant retirement often mixes office PCs, engineering workstations, servers, network gear, and floor printers, each holding different data. Garmin, a designer and manufacturer of navigation and sensor-based products, runs its operational headquarters in Olathe. Design-heavy employers like it retire workstations full of CAD models, firmware builds, and test data, so those drives are classified first.

Where does the data sit in a plant?

Engineering workstations and CAD PCs
Design files, bills of materials, firmware images, and drawings supplied under a customer contract
Front-office, HR, and supervisor computers
Employee names linked to Social Security, driver's license, or bank account numbers, the Kansas personal information set
Plant server rooms, storage, and network gear
Production databases, quality records, backups, and device configurations that include credentials
Floor printers, copiers, scanners, and label printers
Stored print jobs, scanned drawings, and address books kept on internal drives or flash memory

Model changeovers produce the same mix at plant scale. Changeovers tend to retire office, engineering, and plant-floor technology in the same window, and suppliers retooling for a program face a smaller version of the batch.

Which devices hold data but rarely make the list?

  • Multifunction copiers and network printers with internal storage
  • Scanners used for drawings, receiving paperwork, and quality records
  • Switches, routers, and firewalls holding network configurations
  • Notebook computers and tablets carried on the floor or by field service staff
  • Loose drives, USB flash drives, and backup tapes pulled from equipment over the years

NIST SP 800-82 Rev. 3, the federal guide to operational technology security, states: "The asset disposal program should include any removeable media, mobile devices, and traditional OT hardware." It adds that planned obsolescence in IT components may not extend to OT components. Ask about PLCs, HMIs, CNC controllers, and industrial PCs when you request a quote, and we scope each one.

Reuse before recycling for engineering and server hardware

KDHE Policy 05-02 puts equipment reuse ahead of materials recycling, so engineering workstations and servers in working order are evaluated for a second life first. That choice changes the method, because a drive headed for reuse needs a clear or purge that leaves it usable. Ask about resale or buyback terms for Kansas-side equipment when you request a quote.

Components that leave the electronics stream first

Plant clean-outs turn up equipment batteries, fluorescent tubes, and mercury switches or relays. These typically fall under Kansas universal waste handling rather than electronics recycling, and production scrap and battery cells are another stream. UPS units are on Precision's accepted equipment list, and loose batteries, lamps, and mercury parts are scoped on their own lines before pickup.

Server disposal for plant server rooms on the Kansas side

Key takeaway

Plant IT managers typically rank retired devices by data held: a floor scanner storing customer drawings outranks an office monitor without storage.

Which Frameworks Shape a Kansas Manufacturer's Disposal Record?

Four things shape a Kansas plant's disposal record: a state data disposal duty, contract security terms, NIST guidance, and universal waste rules for components. According to KDHE Policy 05-02, Kansas laws and regulations do not specifically address e-waste disposal, and permitted municipal solid waste landfills may accept it.

K.S.A. 50-6,139b and personal information on plant computers

K.S.A. 50-6,139b reaches anyone that collects or keeps personal information in the ordinary course of business, including every employer running payroll. Subsection (b)(2) calls for reasonable steps to destroy, or arrange for the destruction of, records the holder no longer intends to keep. The attorney general enforces it exclusively, with no private cause of action.

What Kansas counts as personal information

Under K.S.A. 50-7a01(g), personal information is a first name or first initial and last name linked to a Social Security number, a driver's license or state ID number, or a financial account, credit, or debit card number, when those elements are neither encrypted nor redacted. HR and payroll files on a retired plant office computer are the usual example.

Subsection (c)(2) gives an affirmative defense to a holder with a bona fide written or electronic records management policy, trained employees, and a good faith error. A certificate of destruction does not create that defense or satisfy the statute by itself. What it shows is your own policy being applied to the hardware that left the plant.

Subsection (h) of K.S.A. 50-7a01 defines a security breach as unauthorized access and acquisition of unencrypted or unredacted computerized data that compromises personal information and causes, or is reasonably believed to cause, identity theft. A supervisor's laptop that leaves a Lenexa plant with readable payroll files is the scenario a documented disposal path is meant to prevent.

What changes for defense suppliers under DFARS 252.204-7012?

Defense suppliers often inherit NIST SP 800-171 media requirements through their contracts. Under paragraph (b)(2)(i) of DFARS 252.204-7012, a covered contractor information system is subject to NIST SP 800-171, and the solicitation or contracting officer sets which revision applies. Johnson County and Kansas City, Kansas, suppliers holding controlled unclassified information should check that contract before any retired device leaves.

  • Requirement 03.08.03 in Rev. 3: sanitize system media containing CUI before disposal, release out of organizational control, or release for reuse
  • The same requirement applies whether or not media are removable, and NARA policies may require destruction when other methods cannot be applied
  • Requirement 03.07.04(c): maintenance equipment containing CUI is verified clean, sanitized or destroyed, or kept inside the facility
  • Precision's records support your media sanitization file, and work involving CUI or covered defense information is scoped against your contract terms

Why doesn't every drive go to the shredder?

NIST SP 800-88 Revision 2, published in September 2025, replaced the withdrawn earlier edition. For information storage media, section 3.1.3 states: "Pulverize and shred techniques for ISM should be avoided for anything but the lowest security categories of data." Proprietary engineering files and CUI usually sit above that category, so manufacturing data destruction follows media type and data sensitivity.

  • Clear: suited to lower-sensitivity data, and NIST's July 2026 FAQ says it does not need multi-pass overwriting
  • Purge: for higher-sensitivity data on devices that may be reused, such as cryptographic erase on supported drives
  • Destroy: for media with no reuse path, matched to the data's security category rather than shredded by default
  • Degauss: a purge technique for legacy magnetic media under the FAQ, not a true destroy method

Kansas environmental rules for the rest of the clean-out

KDHE Policy 05-02 also warns that some e-waste components may be characteristic hazardous waste. K.A.R. 28-31-273 adopts 40 CFR part 273 as in effect on July 1, 2006, covering batteries, pesticides, mercury-containing equipment, and lamps as universal waste. Whether a specific battery or device qualifies depends on the item and the handler.

KDHE's EW-105 standards bind only Competitive Plan Implementation Grant recipients, making them a benchmark rather than a rule. They call for documented removal of fluorescent tubes, mercury switches and relays, and nickel-cadmium and lithium batteries before shredding, with serial numbers or asset tags as disposition evidence. Its degaussing option does not count as destroy under NIST SP 800-88 Rev. 2.

E-waste recycling for Overland Park and Kansas-side businesses

Manufacturing electronics recycling and ITAD across Precision's markets

Key takeaway

Kansas rules reach the personal data and the hazardous components rather than the electronics. When evaluating disposition partners, compliance leads at Kansas-side suppliers typically ask how each record maps to K.S.A. 50-6,139b and their contract.

A Buyer Checklist for a Kansas-Side Disposition Partner

Choose a plant IT equipment disposal partner against written criteria, because the Kansas side keeps adding plants. Panasonic Energy's EV battery plant occupies 300 acres at Astra Enterprise Park in De Soto, former Sunflower Army Ammunition Plant land, and Johnson County has highlighted the nearby 370-acre Flint Commerce Center for light assembly and manufacturing. Each new plant's IT eventually retires.

Criteria Precision meets

  • Holds ISO/IEC 27001:2022 for information security management, plus ISO 9001:2015, ISO 14001:2026, and ISO 45001:2018
  • Uses data destruction methods informed by NIST SP 800-88 Rev. 2, matched to media type and data sensitivity
  • Keeps a chain of custody from pickup at your plant through intake at the Lincoln, Nebraska facility
  • Issues a certificate of destruction and a serialized asset report for the project file
  • Routes hardware with no reuse path to downstream processors

Each criterion maps to a record you keep rather than a promise. Plant IT and security leads typically check the serialized asset report against their own inventory first, since KDHE's EW-105 treats serial numbers or asset tags as evidence of disposition. Certificate fields are agreed with you before pickup.

Questions to settle in the project review

Which fields the certificate and asset report carry
Your auditor or prime contractor may expect serial-level detail for every drive
Whether batteries, lamps, mercury parts, and control hardware can join the pickup
These items may need their own route before the electronics move
Whether CUI or covered defense information fits the project
Your contract terms, not the vendor, decide what the media file must show
How reuse is evaluated for workstations and servers
KDHE ranks reuse first, and resale terms are set in your quote

K-State Olathe's advanced manufacturing and supply chain programs have received federal funding for lab equipment and list Panasonic, Garmin, and Honeywell as industry partners. The campus has said new manufacturers keep announcing facilities in Johnson County and across Kansas. Each new line eventually produces a retirement batch, and written criteria keep the choice of partner consistent from plant to plant.

One secure processing facility for Kansas-side plants

Plants in Olathe, Lenexa, De Soto, and Kansas City, Kansas, schedule pickup, and the equipment is processed at our secure Lincoln, Nebraska facility. Intake, sanitization, and records run under the same ISO management systems, and we scope volume, staging, timing, and pricing for each site in your quote.

IT asset disposition for Overland Park and Johnson County organizations

Key takeaway

Choose a partner for plants in Olathe, De Soto, Lenexa, or Kansas City, Kansas, against records you can file. Settle the rest, from certificate fields to battery handling, during scoping before pickup day.

FAQ

Manufacturing Electronics Recycling Questions for the Kansas Side

In a Kansas-side plant, printers, copiers, scanners, label printers, tablets, and switches holding configurations all can. NIST SP 800-171 Rev. 3 requirement 03.08.03 applies media sanitization whether or not the media are considered removable, and its examples include scanners, copiers, printers, notebook computers, mobile devices, workstations, and network components. Industrial PCs and control hardware belong on a separate tab, so we can scope them when you request a free quote.
Yes, when those computers hold it. Unless federal law requires otherwise, K.S.A. 50-6,139b directs any holder of personal information to take reasonable steps to destroy, or arrange destruction of, records it no longer intends to keep. Shredding, erasing, or otherwise making the information unreadable or undecipherable through any means all qualify. For a manufacturer, the usual exposure is HR and payroll data on front-office and supervisor computers in Olathe, Lenexa, or Kansas City, Kansas.
Often it is not. NIST SP 800-88 Rev. 2 section 3.1.3 says pulverize and shred techniques should be avoided for anything but the lowest security categories of data, and NIST's July 2026 FAQ calls them ineffective for medium and high categories because of data density. CAD files and CUI usually sit above that level, so the method is matched to media type and sensitivity. Tell us early if a project involves CUI, and we scope it against your contract terms.
Separately from the electronics. K.A.R. 28-31-273 adopts the 2006 edition of 40 CFR part 273, which treats batteries, mercury-containing equipment, and lamps as universal waste categories, though applicability depends on the specific item and handler. KDHE's EW-105 benchmark also calls for documented removal of these parts before any shredding. UPS units are on Precision's accepted equipment list, and loose batteries, lamps, and mercury parts are scoped line by line when you request a quote.
A certificate of destruction is one part of the file, not all of it. NIST's FAQ for SP 800-88 Rev. 2 places documentation such as certificates of sanitization inside the organization's own sanitization policy, alongside data classification and verification protocols. A complete manufacturing file pairs the certificate with a serialized asset list, the chain of custody record, and your written policy. Precision agrees its certificate fields with you before pickup.

Request Service

Ready to Get Started in Overland Park?

Get a free quote or send us a message about your project, and we scope pickup and documentation around your site.